Guide
Polycarbonate clarity and UV for Knoxville window well covers
Why UV-rated polycarbonate matters for Knoxville TN window well covers. Free Estimate from our team.
Clear covers are popular when homeowners want basement daylight. UV-rated polycarbonate resists yellowing and brittleness better under East Tennessee sun — including foothill exposure toward Maryville and Seymour. Cheap unrated plastic can haze and crack sooner.
Ask us about UV-rated options when you request a Free Estimate. We’re Knoxville Window Well Covers — plain talk on materials, no scare language.
More: FAQ · Services · Request a quote
Why polycarbonate is used
Polycarbonate is a tough, clear plastic. It is much more impact-resistant than acrylic or glass and stays tough in cold weather. Those traits make it a common choice for window well covers, skylights, and safety glazing.
What UV does to plastic
Sunlight contains ultraviolet light that breaks down many plastics over time. Unprotected plastic can:
- Turn yellow or cloudy, reducing light into the basement.
- Become brittle and crack, especially in cold weather.
- Lose strength, so it cannot carry the load it once could.
UV-rated polycarbonate has a UV-resistant layer or additives that slow that breakdown. HomeAdvisor notes that heavy-duty polycarbonate covers are generally UV resistant, while lightweight plastic covers have little to no UV resistance.
Source: HomeAdvisor, Window Well Cover Cost (updated June 2026).
Sun exposure around Knoxville
East Tennessee gets strong summer sun and long hot seasons. Wells facing south or west in open yards, common in newer subdivisions in Hardin Valley, Farragut, Maryville, and Lenoir City, get the most exposure. Wells under trees or on north sides get less.
Thickness
Thicker sheets are stronger and flex less. Many quality covers use sheets around a quarter inch thick. Ask for the thickness and the load rating in writing.
Clarity over time
Even good polycarbonate collects dust, pollen, and hard-water spots. Clean it with mild soap and water and a soft cloth. Avoid ammonia-based glass cleaners, abrasive pads, and solvents, which can damage polycarbonate or its UV layer. Check the manufacturer's cleaning instructions.
Scratches
Polycarbonate scratches more easily than glass. Do not drag tools across it, and use plastic scrapers for ice. Light scratches do not usually affect strength.
Acrylic and other plastics
Acrylic is clearer when new and cheaper, but it is more brittle and can crack from impact or cold. Lightweight plastic covers are cheapest but may not hold weight. For most wells, UV-rated polycarbonate is the better long-term choice.
Cost
Polycarbonate covers cost more than plastic, and they last longer in full sun.
When clear is not the right choice
If a well sits next to a walkway where people step, or under trees that drop limbs, a combination cover with a metal grate under polycarbonate may be better. See metal vs polycarbonate.
Where we work
Free Estimates in Maryville, Seymour, Lenoir City, Alcoa, and nearby. See our services.
Signs a cover needs replacing
- Yellowing or heavy cloudiness.
- Hairline cracks, especially around fastener holes.
- Brittleness or flaking at the surface.
- Sagging in the middle.
- Light into the basement noticeably reduced.
A cover showing these signs may no longer carry its rated load. Replace it, especially on wells where kids or pets play.
How much light gets through
Clear polycarbonate lets most light through when new. Dust, pollen, and scratches reduce that over time. Cleaning restores much of it; yellowing does not reverse.
A worked example
A home in Lenoir City has a south-facing basement well in an open yard. An inexpensive acrylic cover yellowed and cracked within a few years. It was replaced with a UV-rated polycarbonate lean-to cover. The basement window gets more light, and the cover is holding up in the sun.
Questions to ask
- Is it polycarbonate or acrylic?
- Is it UV-rated, and is the UV side facing up?
- How thick is the sheet?
- What is the load rating in writing?
- What does the warranty cover, and for how long?
Tinted and frosted options
Some covers come tinted or frosted. Tint reduces glare and heat; frosted covers add privacy for bathrooms or bedrooms. Both still need UV protection.
Installation details
Polycarbonate expands and contracts with temperature. Fastener holes should be slightly oversized, and fasteners should not be overtightened, so the sheet can move without cracking. A professional install accounts for this.
Which side faces up
Many UV-rated sheets are protected on one side only. That side must face the sun. A protective film often shows which side is which. If a cover is installed upside down, it can yellow early. Professional installers check this.
Heat under clear covers
Clear covers can let the sun warm the well on summer afternoons. Most basement windows handle this without problems, but tinted sheets or covers with vents can reduce heat buildup in very sunny spots.
Cost of replacement versus repair
Cracked or yellowed polycarbonate generally cannot be repaired. Small chips at the edges may not matter, but a cracked sheet should be replaced. Replacement sheets for an existing frame can cost less than a whole new cover.
More polycarbonate questions
Why does UV rating matter for window well covers?
UV light breaks down plastics. Unprotected covers can yellow, cloud, and become brittle. UV-rated polycarbonate resists that breakdown.
How should I clean a polycarbonate cover?
Use mild soap, water, and a soft cloth. Avoid ammonia-based cleaners, abrasive pads, and solvents.
Is polycarbonate better than acrylic?
For window well covers, usually. Polycarbonate is far more impact-resistant and stays tough in cold weather.
How thick should a polycarbonate cover be?
Many quality covers use sheets around a quarter inch thick. Ask for thickness and load rating in writing.
Does polycarbonate scratch?
More easily than glass. Use plastic scrapers and avoid dragging tools across it.
When should I replace a polycarbonate cover?
When it is yellowed, cloudy, cracked, brittle, or sagging, it may no longer carry its rated load.
Are frosted or tinted covers available?
Yes. Tint reduces glare; frosted covers add privacy. Both still need UV protection.
Why do fastener holes matter on polycarbonate?
Polycarbonate expands and contracts with temperature. Slightly oversized holes and fasteners that are not overtightened prevent cracking.
Does it matter which side of a polycarbonate cover faces up?
Yes. Many sheets are UV-protected on one side only, and that side must face the sun.
Can cracked polycarbonate be repaired?
Generally no. A cracked sheet should be replaced; a new sheet for an existing frame may cost less than a whole cover.
Get covers measured and installed
When you are ready, see our window well cover installation in Knoxville page for cover types, egress rules, how we measure, and how to request a Free Estimate.
Related guides
When you’re ready
Request a quote
Tell us your city or ZIP, how many wells, and whether any are egress openings. We’ll follow up with a Free Estimate.
Request a quoteOr call (865) 381-0951